After upgrading my Sena Spider ST-1 to firmware version v.2.0.5
I cannot hear anything and cannot say anything in exchange with my second Sena Spider ST-1 with firmware version 1.1.6 and vice versa.
They connect each other but voice doesn't come not over, whether from the newer version or the older version. I did a factory reset on the one with the v.2.0.5, but doesn't change anything.
Fecha
Votos
8 comentarios
-
Steven Hey, I have the same thing with 4 ST-1's. Have to shout for it to pick anything up. Have you figured out a fix or heard from sena? Thanks.
-
Blackbird Hey Steven, yes, sena adviced me either to do a factory reset as it is described in the manual or to do a hard reset with a small pin on the back side of the device.
None of this worked for me :(
Another way is to install the older firmware again.
At the moment I have no idea, where to get the older firmware, because I have no backup from the old version. I'll ask sena this question again, because it wasn't answered properly.
So far, good luck, and please tell me, if you figured out something helpful! -
Raymond Balister I had a similar issue. I just got two new ST1-01 units. As the good software professional that I am, I immediately updated the firmware from 1.1.1 to 1.1.6 and installed them in two helmets. Connecting them to the mesh seemed to work but, like you, we had to yell to get any audio to come out. After finding this post I went hunting for a firmware archive and found it at:
https://archive.org/download/sena-firmware-files
I downloaded all the English firmware versions for the ST1-01. I also did a binary compare between the 1.1.6 version I had from Sena and the one I got from the archive to be sure. Both were the same file. I then downloaded 1.1.5 to both of my devices and tried again. Success, both units are able to hear audio and I only have to speak a little above a whisper. Much better. I suspect it may be a problem with the fix in 1.1.6 for
- Improved the Advanced Noise Control feature
Sena, looks like there's a problem here with the latest release.
-
Blackbird Hello Raymond!
I'm very very thankful for this answer!
I'm a (female) IT Professional too, but I googled for the firmware-archive and found nothing, so I really appreciate your effort here and your research for the issues why this happenend.
I got the same on my mind, that the improved andvanced noise control was too much of improvement ;)
Regards from vienna and I'll install the older firmware immediately!! :)
Thank you!!! -
daniele grandi Raymond Balister: Thank you so much for this answer.
There is definitely an issue with 1.1.6. -
daniele grandi Quick update: 1.1.5 did not seem to solve the issue for me. I still have to scream to be heard. Does anyone else have that issue?
-
Andres Klapper There seems indeed to be an issue with newer versions. Me and my friends are using Spiders RT1, and the latest 1.1.7 version is a complete disaster.
Volume is a complete mess (Prompts seem to be stuck at 100%, intercom and music doesnt correspond to what you select and the + and - buttons change "some" volume but not the same behaviour as before), we have to scream to the mic for other to hear us, trying to use the share music function usually ends up with the device crashing and have to restart it.Downgrading all of them to 1.1.5.
Raymond Balister MVP man, saved us with that link, thank you.
daniele grandi be sure to activate the Audio Overlay Volume Management checkbox and set the Intercom-audio Overlay sensitivity to 5.
-
Young Kim I have same issue. ir is firmware 1.1.6 at the moment. and I was about to update to 1.1.7 . I am riding with riders who has 30k, 50s and I have to shout to them to hear me. and some metal banging sound is on background. without me they don't hear that sound.
seems like new version of firmware is not working either.
so I will try 1.1.5
Iniciar sesión para dejar un comentario.