Luca Sauda
- Actividad total 37
- Última actividad
- Miembro desde
- Siguiendo 0 usuarios
- Lo siguen 0 usuarios
- Votos 5
- Suscripciones 13
Resumen de la actividad
Última actividad de Luca Sauda-
Luca Sauda creó una publicación,
Problems changing Intercoms Order from the App
This is the scenario: Normally I'm paired only with my wife's 20S, as intercom n°1. Sometimes I add a friend's intercom using the Universal Intercom Pairing. So my friend is the new n°1 and my wife...
-
Luca Sauda hizo un comentario,
I also have the same issue. It seems that the GPS (if paired with "GPS pairing" and with "Audio Multitasking" active) doesn't have its own volume, but it depends on the volume of the current mode (...
-
Luca Sauda hizo un comentario,
We already have the microphones touching the mouth, and the Sidetone disable.I teached my passenger to speak loudly, in order to optimize the signal/noise ratio. I don't think is a good idea tell h...
-
Luca Sauda hizo un comentario,
Hi! Maybe what you noticed is true, but I think it's a different problem. I'm quite sure that what we ear (both me and my passenger) from the speakers comes after few milliseconds, but there are no...
-
Luca Sauda creó una publicación,
No more "Ambient Mode Button" on Handlebar Remote
I'm happy that now (with 1.4.1 fw) a tap on the jog dial is replicated by a tap on the remote (instead of pressing for 1 second), but why don't keep using the joystick for that, and leave unchanged...
-
Luca Sauda hizo un comentario,
The discussion you linked doesn't talk about my request.
-
Luca Sauda hizo un comentario,
I have upgraded my units, and now the 20S speaks to me in italian.But the voice commands are unchanged, I still have to speak in english to the 20S.Is this feature in development?
-
Luca Sauda creó una publicación,
Connect to the Schuberth C3 Pro antenna
Since the 20S FM antenna isn't the best in the world, would be possible to connect in some way (with a DIY mod) the internal antenna of the Schuberth C3 Pro?I know this will probably void the warra...
-
Luca Sauda hizo un comentario,
It's already possible. From the user's guide: "When you power on the headset, keep pressing the Jog Dial and the Phone Button simultaneously for about 3 seconds until you hear three, high toned bee...
-
Luca Sauda hizo un comentario,
@Ken, I didn't talk about "standby". My idea is based on how you pre-configure your motion sensor, then the ambient button behavior will not change anymore. Otherwise a dedicated option would also ...