beans
- Attività totali 122
- Attività recente
- Membro dal
- Segue 0 utenti
- Seguito da 0 utenti
- Voti 0
- Abbonamenti 50
Commenti
Attività recente di beans-
I have updated to v1.7 recently, and I'm able to listen to the FM tuner. I can hear the voice prompts when you power on/off. Make sure that your volume is all the way up - rotate the volume wheel c...
-
You need the latest firmware on the 10S for it to support the FW. If you go to the link below you will see in the firmware history that they added support for Freewire http://www.sena.com/category/...
-
Hi, I downloaded the same 64bit version and do not have this warning. Make sure your defender definitions are updated, then reboot and try to download it again.
-
Make sure the antenna on the 20S is up. You can also try turn off the Bluetooth on the phone and turn it back on. This will reset the Bluetooth radio on the phone. Also try to turn off and on the p...
-
First, if you are not yet registered, go here: http://www.sena.com/support/registration/ Then you need to download the sena firmware update software here: http://www.sena.com/device-manager-downloa...
-
Hi Billhuffmansr, if you do not see your model in the device manager it's lumped in "Other Sena products: Power it on"
-
The firmware history for each sena product is online. here's the 20s: http://www.sena.com/category/firmware/firmware-20s/ V1.6.1 Sena FreeWire support A2DP pairing GPS device support Minor bug fix...
-
The Sena Smartphone App only works with the Sena 20S, 10S, 10C, 10U, and 10R. Compatibility: Requires iOS 7.0 or later. You should try to restart your iPhone. To restart your iPhone hold down the H...
-
No. just press the jog once to initiate universal intercom. On the non-sena use the redial or voice command function to connect with your 10c
-
Yeah, that video is wrong. You need to hold the jog dial until it says "configuration menu". Let go. Turn the jog dial several time until you hear "universal intercom", then press the phone button ...