
Randal Benteman
- Gesamtaktivitäten 23
- Letzte Aktivität
- Mitglied seit
- Folge ich 0 Benutzer
- Gefolgt von 0 Benutzer
- Stimmen 7
- Abonnements 7
Aktivitätsübersicht
Neueste Aktivität von Randal Benteman-
Randal Benteman hat einen Kommentar hinterlassen
Sound I from a SMH10R to my Sena 20S sounds like someone popping the old Jiffy Pop corn on a stove or someone rustling paper continuously.
-
Randal Benteman hat einen Post erstellt
Setting Intercom-audio Overlay Sensitivity
When setting the overlay sensitivity through configuration setting my 20S turns off, shuts down, when the phone button is tapped to set the 1 through 10 range. I am following the manual directions ...
-
Randal Benteman hat einen Kommentar hinterlassen
Made a weekend ride and the problem of the left speaker not having sound persists. Stopped by Walmart and purchased a set of ear buds plugged them into the front port and I have no sound in the rig...
-
Randal Benteman hat einen Kommentar hinterlassen
Had this exact thing happen today, no sound in the left ear phone using intercom through my Goldwing and routing it into a SM10 and then to my 20S headset. Turned the headset off and then back on a...
-
Randal Benteman hat einen Kommentar hinterlassen
Place my new 20 S on my helmet today and took a ride. FM radio terrible reception. I even have a local station not 20 miles away and the 20 won't pick it up. I did the upgrade as soon as I opened t...
-
Randal Benteman hat einen Kommentar hinterlassen
Must be an app feature as sometimes I ride without use of Bluetooth but have I-pod plugged into the back port and don't want the unit to auto off.
-
Randal Benteman hat einen Kommentar hinterlassen
I used a small thin strip of electrical tape. I did leave a small gap to see the LED.
-
Randal Benteman hat einen Kommentar hinterlassen
Good idea! I have been re-pairing everything each time I want to connect a new device to get it the right order.
-
Randal Benteman hat einen Kommentar hinterlassen
Good idea! I have been re-pairing everything each time I want to connect a new device to get it the right order.