Ken Kimari
- Total activity 580
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 186
Comments
Recent activity by Ken Kimari-
Whenever you do a firmware upgrade you need to do a Factory default reset (in the manual) before using the unit. Unfortunately when you do that, all your settings are reset and you have to go into...
-
a couple times I've had a fault issue which was corrected by a fault reset. may try that too.
-
What I would try next is to go to the Sena App and write down all the settings you are using then select factory default to get it back to the original settings. Perhaps some of settings changed t...
-
See if you can borrow another iPhone and pair it to your Sena. If the problem clears up you can pretty much suspect it is a phone problem rather than the sena.
-
Hey Sena if your listening the SMH-10 also needs some help with the SR10 interface. Occasional robot voice with it also.
-
I agree Ken. It certainly would be nice if they would be more forthcoming as to what exactly has been updated or fixed. Having that information would at least let owners know if their specific is...
-
Look on Amazon, Radio Shack. All have 110 to usb chargers. Many cellphone chargers with a micro usb plug (pretty much all except iPhone) work too.
-
Tried it also - same result, cannot make an outgoing call while connected to intercom. Personally, from a safety standpoint, I don't like to initiate calls while riding unless it is urgent so it i...
-
Let me know what you find out
-
Thanks Ken. I suspected as much with the phone call issue. Maybe one of these days when the technology advances they can add that feature. I know you have to do a full factory reset every time y...